WallStack

About

What this site is

WallStack is an independent site that makes material calculators for walls: dry-stacked retaining walls and mortared concrete block walls. It is not owned by a block manufacturer or a store, and the calculators do not favor any brand.

The idea is simple. A block count is only part of a wall. The calculators carry on to the gravel base, drainage stone, drain pipe and fittings, filter fabric and mortar, and convert each of them into the units you actually buy.

Where the numbers come from

Every coefficient — base depth, compaction allowance, drainage column width, outlet spacing, fabric roll size, mortar yield, stone density — is taken from a published source such as an industry best-practice guide, a block or product data sheet or a state transportation manual, and recorded with the date it was checked. Where no published figure exists, the value is a stated estimating allowance. The calculation steps under every result show the arithmetic.

Block sizes vary between manufacturers. If your block differs from the sizes offered, enter its actual dimensions as a custom size.

What the calculators are not

They estimate materials. They do not design walls, check them for strength or stability, or tell you whether a permit is needed where you live. Taller walls and walls that hold back a driveway, slope or building need a design from a licensed engineer in most places.

How the site is paid for

The calculators are free. Some links to retailers may be affiliate links: if you buy through them the site may earn a commission, at no extra cost to you. Commissions never change the quantities a calculator produces, and the calculators work the same whether or not you use those links. The site may also show ads.

Contact

Found a number that looks wrong, or a block size we should add? Write to hello@wallstackcalc.com.

See also the privacy policy and the terms of use.